| 王 迪,卫 磊,雷 伟,吴子祥.新型翻修延长棒的设计及其在翻修模型中的生物力学研究[J].中国脊柱脊髓杂志,2017,(11):1019-1023. |
| 新型翻修延长棒的设计及其在翻修模型中的生物力学研究 |
| 中文关键词: 翻修手术 模型验证 脊柱融合术 生物力学 |
| 中文摘要: |
| 【摘要】 目的：采用对端结合的方式，设计适用于脊柱翻修手术的延长棒，研究其生物力学特性。方法：依据美国材料与试验协会（American Society for Testing and Materials，ASTM）的标准测试方法，制备椎体切除术后腰椎模型。采用静态压缩弯曲试验、静态拉伸弯曲试验和疲劳试验，分别测量“传统连接棒”（A组，n=6）和“翻修延长棒”（B组，n=6）的屈服载荷、弯曲刚度和疲劳参考值，初步评价“翻修延长棒”的生物力学稳定型。结果：在静态压缩弯曲试验中，A组试验模型屈服载荷为865.60±25.71N，弯曲刚度为52.35±0.38N/mm。B组试验模型屈服载荷为863.20±11.01N，弯曲刚度为52.92±2.43N/mm，两组之间无统计学差异（P＞0.05）。在静态拉伸弯曲试验中，A组试验模型屈服载荷为1184.20±30.14N，拉伸弯曲刚度为58.89±3.01N/mm；B组试验模型屈服载荷为1169.20±14.89N，拉伸弯曲刚度为57.48±1.47N/mm，与A组比较均无统计学差异（P＞0.05）。在疲劳试验中，A组的疲劳载荷参考值为303N，B组的疲劳载荷参考值为302N，与A组比较无统计学差异（P＞0.05）。结论：新型翻修延长棒具有与传统连接棒相似的屈服载荷、弯曲刚度及耐疲劳性。 |
Design and biomechanical evaluation of a novel connective rod for revision surgery |
| 英文关键词:Reoperation Model validation Spinal fusion Biomechanics |
| 英文摘要: |
| 【Abstract】 Objectives: To design a novel connective rod for revision surgery by using an end to end connection joint, and to evaluate their biomechanical characters. Methods: Following the guidelines of American society for testing and materials(ASTM), static compression bending test, static tension bending test, fatigue test was employed on both conventional rod(group A, n=6) and connective rod for revision surgery(group B, n=6) to measure the bending yield load, bending stiffness and maximum run-out load, and to determine the biomechanical stability of novel connective rod. Results: In static compression bending test, compressive bending yield load and compressive bending stiffness of group A were 865.60±25.71N and 52.35±0.38N/mm respectively; while they were 863.20±11.01N and 52.92±2.43N/mm in group B, the differences between groups had no statistical significance. In static tension bending test, tensile bending yield load and tensile bending stiffness of group A were 1184.20±30.14N and 58.89±3.01N/mm respectively; and for group B, they were 1169.20±14.89N and 57.48±1.47N/mm respectively, the differences between groups had no statistical significance. In fatigue test, the maximum run-out load of group A and group B was 303N and 302N respectively, the difference between groups had no statistical significance. Conclusions: Compared with the conventional connective rod, the novel connective rod for revision surgery has a similar bending yield load, bending stiffness and maximum run-out load. |
| 投稿时间：2017-07-20 修订日期：2017-10-22 |
| DOI： |
| 基金项目:国家自然科学基金资助项目（81301535），陕西省重点研发计划（2017SF-024） |
|
| 摘要点击次数: 2108 |
| 全文下载次数: 1063 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
